How To Use - Coway AP-3008FH Instructions Manual

hOw TO USE

- Connect the power plug to the electrical outlet before operating the product.
- When the air purifier is turned on, it automatically operates in Auto mode.
Do not insert a pin, foreign object or water into the air outlet or into the unit.
This may result in physical injury or a product malfunction.
Tips
When moving the product, move the product using the wheels while holding both
handles.
To Operate the Manual Mode
Turn the product on by pressing the Power
button and select an airflow speed by pressing
the Airflow speed button. Step 1 → Step 2 →
Step 3 → Step 4 → Turbo
∗ If the Airflow speed button is pressed during an
operating mode (Auto / Deodorization / Silent / A3 Power Saving), the unit immediately turns to manual mode.
To Select the Auto Mode
Turn the product on by pressing the Power button
and select a mode by pressing the Mode button.
Auto → Deodorization → Silent → A3 Power
Saving
▶
Auto mode
Automatically controls the airflow speed (Step 1, 2, 3 and 4) according to the air pollution level detected by the dust
and odor sensors in order to purify the air more effectively. This operating mode is appropriate for general users.
▶
Deodorization mode
Increases the odor sensor sensitivity by 50%. Controls the airflow speed according to a higher pollution level from
among the levels detected by the dust and the odor sensors to purify the air more effectively.
▶
Silent mode
Decreases the airflow speed to under Step 1 for a quiet, pleasant atmosphere.
▶
A3 power saving mode
When the pollution level remains at level 1 for 10 minutes, the product switches to A3 power saving mode. A3
power saving mode is cancelled if the pollution level rises to level 2 or higher. When A3 power saving mode
continues for 30 successive minutes, A3 power saving mode is temporarily cancelled and the airflow speed is set to
Step 1 to circulate the surrounding air. When the product operates in A3 power saving mode, all indicators except
for the A3 mode indicator are turned off.
Pollution level 1
Airflow speed Step 1
Pollution level 2 Pollution level 3
Step 2 Step 3
▶
Power saving mode
The fan stops.
9
10