Table of Contents
Advertisement
ADJUST PARTICLE SEnSOR
When the product is shipped, the pollution sensor is set to normal sensitivity. If the pollution level stays at
the highest level after 2 hours of operating or stays at the lowest level for more than 1 hour when the air
does not appear clean, users can adjust the sensitivity of the sensor.
1. While the air purifier is in operation, press and hold the Airflow speed and
Mode buttons at the same time for 2 seconds or more.
2. The Airflow speed indicator blinks at an interval of approximately 0.5 seconds.
3. Adjust the sensor sensitivity by pressing the Airflow speed button. The sensitivity
of the sensor is represented by the blinking airflow speed indicator.
Step 1
Sensitive
4. When the Airflow speed and Mode buttons are pressed and held
simultaneously for 2 seconds or more, the system returns to normal operation,
saving the sensitivity setting.
∗ If no button is pressed for 10 seconds, the current sensitivity is automatically saved.
Step 2
Step 3
Normal
Insensitive
11
12
Hide quick links:
Advertisement
Table of Contents
