Bushnell Trophy Cam Agressor 11977 Instruction Manual page 30

Reviewing Images by Connecting the Camera to a Computer
You can always unmount the entire camera from the tree and connect its
USB port to a computer-it will be recognized as a "removable disk", without
the need to install any drivers or software. When using a PC (or Mac*) to view
photos (or video clips*), first connect the device to the computer with a USB
cable (not included, available at most electronics/computer retailers) that
has a "Mini-B" USB plug on one end (camera) and a "Standard-A" USB plug
at the other end (computer). Then use commercial software with an image
browser feature, or an image browser included with the PC's operating
system to view images saved on the SD card in the folder \DCIM\100EK113
(a new folder will be created every 1000 images). Each new image or video
will be numbered incrementally with 8 digits in order of the time it was
captured-the first 4 digits are the month and day, the last 4 digits the # of
the image. For example, you will see file names such as "09020001.JPG"
or "09020001.AVI", etc. Through the file format suffix you can distinguish
whether the file is a still photo (with suffix .JPG) or a video (with suffix .AVI).
*video files may require additional software for viewing on a Mac.
The Trophy Cam HD Aggressor supports 3 kinds of file system formats,
FAT12, FAT16, and FAT32. The default value is FAT16 to save photos and
videos. Here are some related notes:
• You don't need to be concerned about the file system format of the
Trophy Cam HD Aggressor unless your equipment has problems
reading the SD card. If this happens, please format the SD card with
the Trophy Cam HD Aggressor or in your computer first and then
insert the card into your Trophy Cam HD Aggressor and try again.
• The default file system format of the Trophy Cam HD Aggressor is
FAT16, which most computers can read. If you format an SD card for
the Trophy Cam HD Aggressor in your computer, you should choose
the file system format FAT16. Normally FAT16 is recommended unless
you have another image viewer that uses FAT12 or FAT32 format.
Deleting Photos or Videos
To delete all photos from the installed SD card, use the Format parameter
(see pg. 23 for details).
30