Bushnell Trophy Cam Agressor 11977 Instruction Manual page 20

Parameter
LED Control
(Multi-Flash
feature)
Camera Name
Video Size
(only affects
video clips in
Video or Hybrid
modes)
20
Settings
(Bold=default)
Low, Medium,
High
(Input)
See "Using the
Setup Menu Input
Screens"
1920x1080,
1280x720,
640x360
Description
Controls how many LED lamps fire
when images are taken in low light.
"High"= all LEDs fire (36 or 48,
depending on the model), which is
the default setting. Set to Medium or
Low if you are getting overexposed
flash photos or will place the camera
at very close range to the subject
you want to photograph. In general,
select High if most of your intended
subjects will be over 30 ft. from the
camera, Medium for the 15 to 30 ft.
range, and Low for subjects under 15
ft. away. Note: in video mode, set to
LED Control to "Low" if videos are
overexposed at the Medium setting.
Allows the user to set a custom
name for the camera. Useful for ID
purposes when multiple cameras are
setup, since each camera will imprint
its name on all photos (but not
videos) it captures.
Selects video resolution (in pixels
per frame). Higher resolution
produces better quality videos,
but creates larger files that take
up more of the SD card capacity
(fills up faster). 640x360 is VGA
video in "widescreen" 16:9 format.
The highest setting provides HD
video. Using high speed SD cards
(SanDisk SDHC class 6 or higher)
®
is recommended if you will use the
1280x720 or 1920x1080 video
settings.