Control Panel - Delta 80SF060J24 Instruction Manual

80sf series
Table of Contents

Advertisement

2.3 Control Panel

Speed
Function
About the functions of "AUTO", "AIR", "ROOM', "OFFICE", "RESTAURANT", and "COMMON", they
are currently unavailable for this unit but reserved.
2.3.1 Buttons on the Control Panel
Buttons on the control panel : ON/OFF, Mode, Light, ▲, ▼, Function, Speed
ON/OFF
Press this key to switch on/off the unit. Note: under the blow mode, the unit can be turned on
directly by pressing this key.
Mode
The mode will vary circularly as the following order by pressing this key:
COOL: it indicates the cooling status
DRY: it indicates the dehumidifying status and the fan runs at the low speed.
FAN: it indicates the fan status.
HEAT: it indicates the heating status. (Note: it is unavailable for the cooling only unit)
Light
It switches on/off the lights on the control panel (expect the running and power indicating lights)
and "88"LED.
Function
(1) Under "ON" status, it can switch functions among up/down SWING, left/right SWING,
BLOW, E-HEATER, TIMER, AIR, SLEEP, SAVE, SET, and TEMP by pressing this key, and
then set the corresponding function by pressing ▲/▼, and then make a confirmation either
by pressing "Function" button or with no operation in 5 seconds.
E-HEATER
Light
Fig. 2
NOTE!
4
Mode
ON/OFF

Advertisement

Table of Contents
loading

This manual is also suitable for:

80sf040j24

Table of Contents