Changing The Program Sequence; Payment System; Once A Program Has Started; Changing The Program - Miele PT 7135 C Vario Operating And Installation Instructions

Payment system

Opening the door or cancelling the
program after it has started may
cause a loss of credit (depending on
how the dryer was set up)*.
* Either during the commissioning
process or subsequently, a Miele ser-
vice technician can re-set the payment
system so that programming changes
can be made.

Once a program has started

- changing the program

You cannot change to another program
once a program has started (this
prevents unintentional alterations).
You will need to cancel the current
program before you can select a new
one.

- cancelling the program

^ Press direct select button G
Cancel.
On some programs, laundry will be
cooled down if a certain temperature
has been reached.
If direct select button G Cancel is
pressed again, Finish appears in the
display.
^ Open the door.
^ Close the door.
^ Immediately select the program you
want, and then start it.

Changing the program sequence

Adding or removing laundry
after a program has started
,
The laundry, the drum and the
back of the tumble dryer all become
very hot during operation. Take care
when in the vicinity of the appliance,
when opening the door and
handling freshly dried laundry.
Danger of burning.
^ Press direct select button G
Cancel.
On some programs, laundry will be
cooled down if a certain temperature
has been reached.
^ Only open the door once the laundry
has cooled down completely.
^ Add or remove items as required.
^ Close the door.
^ Select a program.
^ Press the Start button.

Power outage

– If the tumble dryer was switched off
during a program or there has been
a power outage:
^ Press the OK button after switching
the dryer back on and start the
program again.

Time remaining

The time left shown in the display may
now vary from the actual drying time.
21