Operation Manual - Sharp AY-XP24PU Service Manual

AY-XPC15PU

[2] Operation Manual

BASIC OPERATION
NOTE:
TIPS ABOUT AUTO MODE
‡ ,n WKe AUTO mode, WKe unit will automatically select COOL or HEAT mode by comparing WKe room
temperature and your desired temperature.
‡ 7Ke unit will automatically switcK between HEAT and COOL mode to keep WKe desired temperature.
‡ COANDA and MULTI SPACE button will be inactivated during AUTO mode.
1
Press the HEAT, COOL , AUTO or DRY
button .
: HEAT
: AUTO
‡ 7Ke green OPERATION lamp (
TO TURN OFF
Press WKe STOP button.
‡ 7Ke green OPERATION lamp (
2 Press the TEMPERATURE button to set
the desired temperature.
1
(HEAT/COOL/AUTO mode)
7Ke temperature setting range:
61-86 °F (16-30 °C).
TURN OFF
(DRY mode)
7KH WHPSHUDWXUH can be adjusted up to an addi-
tional ±3 °F (±2 °C) from WKe desired temperature
2
automatically by pressing WKe TEMPERATURE
button.
(Example: 1 °F / 1 °C KLJKHU)
3
(Example: 3 °F / 2 °C lower)
1
3 Press the FAN button to set the desired
fan speed.
AUTO
‡ In WKe DRY mode, WKe fan speed is preset to
AUTO and cannot be FKDQJHG.
: COOL
: DRY
) will OLJKt up.
) will turn off.
SOFT LOW HIGH
2 – 6
ADJUSTING THE AIR FLOW
DIRECTION
VERTICAL AIR FLOW DIRECTION
1 Press the SWING button (
‡ 7Ke vertical louver will swing.
2 Press the SWING button (
to stop at the desired position.
CAUTION:
NevHU DWWHPSW WR DGMXVW WKH ORXYHrs manually.
‡ Manual adjustment of WKe louvers can cause
WKH XQLW WR PDOIXQFWLRQ.
‡ :KHn WKe vertical adjustment louver is posi-
tioned at WKe lowest position in WKe COOL or
DRY mode for an extended period of time,
condensation may result.
NOTE:
‡ 7Ke adjustment range is narrower WKDn WKe
SWING range in order to prevent condensa-
tion from dripping.
HORIZONTAL AIR FLOW DIRECTION
).
) again
1
2
Louver link