Yamaha PSR-A3000 Owner's Manual page 21

2 TAB [E][F] buttons
These buttons are used to change the pages of displays that have "tabs" at the top.
3 [1 ] – [8 ] buttons
The [1 ] – [8 ] buttons are used to make selections or adjust settings (up or down correspondingly) for
functions shown directly above them.
For menus that appear in this section of
the display, use the [1 ] – [8 ] buttons.
For menus that appear in this section of the
display, use the [1 ] – [8 ] buttons.
For list menus that appear, use the [1 ] – [8 ]
buttons to select the desired item.
For parameters that appear in slider (or knob)
form, use the [1 ] – [8 ] buttons to adjust
the value.
To reset the desired parameter value to its
default, simultaneously press both the [] and
[] buttons below it.
PSR-A3000 Owner's Manual
21