Voices; Playing The Keyboard; Playing Voices - Yamaha PSR-A3000 Owner's Manual

1

Voices

– Playing the keyboard –

Playing Voices

The Voices can be played via three keyboard parts: LEFT, RIGHT 1 and 2. You can combine these parts by using
the PART ON/OFF buttons to create luscious instrument textures and convenient performance combinations.
LEFT part
Left-hand (LOWER) section
• To play one single Voice on the entire keyboard:
Turn on the RIGHT 1 or 2 part.
• To play two different Voices in layer on the entire keyboard (Layer):
Turn on the RIGHT 1 and 2 parts.
• To play different Voices in the right- and left-hand sections of the key-
board (Split):
Turn on the LEFT and RIGHT (1 and/or 2) parts. The F#2 and lower keys are used
for the LEFT part while the upper keys (excluding F#2) are used for the RIGHT 1
and 2 parts. The key which divides the keyboard into the left-hand and right-hand
sections is referred to as the "Split Point."
1
Turn on the PART ON/OFF button corresponding to the part you
want to use.
The corresponding PART SELECT button is automatically turned on.
36
PSR-A3000 Owner's Manual
The instrument features a wide variety of exceptionally realistic
instrumental Voices, including piano, guitar, strings, brass, wind
instruments and more.
For selecting the keyboard part to
change the Voice
For turning on/off the keyboard parts
Right-hand (UPPER) section
Split Point (F#2 by default)
RIGHT 2 part
RIGHT 1 part
NOTE
For a list of preset Voices of this
instrument, refer to the "Voice List" in
the Data List on the website.
NOTE
The Split Point can be changed
(page 58).
NOTE
You can save the Voice selection and
on/off setting for each part to Registra-
tion Memory (page 85).