File Selection Display Configuration - Yamaha PSR-A3000 Owner's Manual

File Selection Display Configuration

The File Selection display is for selecting Voice, Styles, and other data. The File Selection display appears when
you press one of the VOICE or STYLE category selection buttons, the SONG [SELECT] button, etc.
1 Location (drive) of data
• PRESET..........Location where pre-programmed (preset) data is stored.
• USER...............Location where recorded or edited data is saved. Installed
• USB .................Location where data on USB flash drive is saved. This
2 Selectable data (files)
The files that can be selected on this display are shown. If more than 10 files
exist, the page numbers (P1, P2 ...) are shown below the files. Pressing the
corresponding button changes the display page. When other pages follow, the
"Next" button appears, and for the previous page, the "Prev." button appears.
3 MENU 1/MENU 2
At the bottom of the File Selection display, you can toggle the indication
between MENU 1 and MENU 2 by pressing the [8 ] button. Selecting
MENU 1 shows the function names related to the current file (Voice, Style,
Song, etc.) while selecting MENU 2 shows the function names of the file/
folder management (page 27).
26
PSR-A3000 Owner's Manual
Expansion Voices or Styles are also saved here in the Expan-
sion folder.
appears only when a USB flash drive is connected to the [USB
TO DEVICE] terminal.
1
2
3
NOTE
Before using a USB flash drive, be sure
to read "Connecting USB Devices" on
page 95.
NOTE
By pressing the [USB] button, you can
also access Voices, Styles, and other
data files which are saved in the USB
flash drive (page 96).
NOTE
The data, both pre-programmed and
your own original, are saved as "files."