Step 1 Assembling The Speakers - Panasonic SC-PT860 Operating Instructions Manual

1
step
Assembling the speakers
[[ P T560[ ] Front speakers
[PT860]
Front speakers and surround speakers
Preparation
≥To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
≥For assembly, use a Phillips-head screwdriver.
≥For optional wall mount, refer to page 8.
Make sure you have all the indicated components before starting assembly, setup, and connection.
[[ P T560[ ] 2 Front speakers
[PT860]
2 Front speakers and
2 Surround speakers
Speaker assembly option
Thread the speaker cable through
the base.
Leave about 100 mm
You can remove and use the cable
from the stand. To reattach the cable,
refer to page 8.
∫ Preventing the speakers from falling
≥You will need to obtain the appropriate screw eyes
to match the walls or pillars to which they are
going to be fastened.
≥Consult a qualified housing contractor concerning
the appropriate procedure when attaching to a
concrete wall or a surface that may not have
strong enough support. Improper attachment may
result in damage to the wall or speakers.
6
[[ P T560[ ] 2 Stands (with cable)
[PT860]
4 Stands
≥ 2kstands with short cable:
For front speakers
≥ 2kstands with long cable:
For surround speakers
Position the
cable between
the ridges.
Leave about 90 mm
Attach the speaker.
[[ P T560[ ] 2 Bases
[PT860]
Slide into the groove.
Tighten securely.
Insert the wire fully.
i: White
j: Blue
Push!
Press into the groove.
Tighten securely.
Insert the wire fully.
i: White
j: Blue
Push!
Press into the groove.
Tighten securely.
String (not included)
Thread from the wall to the speaker and tie
tightly.
Rear of the speaker
[[ P T560[ ] 8 screws
[PT860]
4 Bases 16 screws
Approx.
Screw eye
150 mm
Wall
(not included)