Step 1 Assembling The Speakers - Panasonic SC-PT860 Operating Instructions Manual

step 1
Assembling the speakers
[PT560]
Front speakers
[PT860]
Front speakers and surround speakers
Preparation
≥ To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
≥ For assembly, use a Phillips-head screwdriver.
≥ For optional wall mount, refer to page 6.
Make sure you have all the indicated components before starting assembly, setup, and connection.
[PT560] 2 Front speakers
[PT860]
2 Front speakers and
2 Surround speakers
Speaker assembly option
Thread the speaker cable through
the base.
Leave about 100 mm
You can remove and use the cable from
the stand. To reattach the cable, refer to
page 6.
∫ Preventing the speakers from falling
≥ You will need to obtain the appropriate screw eyes to match the
walls or pillars to which they are going to be fastened.
≥ Consult a qualified housing contractor concerning the
appropriate procedure when attaching to a concrete wall or a
surface that may not have strong enough support. Improper
attachment may result in damage to the wall or speakers.
Downloaded From TheatreSystem-Manual.com Manuals
4
4
[PT560] 2 Stands (with cable)
[PT860]
4 Stands
≥ 2kstands with short cable: For front
speakers
≥ 2kstands with long cable: For surround
speakers
Position the
cable between
the ridges.
Leave about 90 mm
Attach the speaker.
[PT560] 2 Bases
[PT860]
Slide into the groove.
Tighten securely.
Insert the wire fully.
i: White
j: Blue
Push!
Press into the groove.
Tighten securely.
Insert the wire fully.
i: White
j: Blue
Push!
Press into the groove.
Tighten securely.
String (not included)
Thread from the wall to the speaker and tie tightly.
Rear of the speaker
[PT560] 8 screws
[PT860]
4 Bases 16 screws
Approx.
150 mm
Screw eye
Wall
(not included)