Steaming - Russell Hobbs 21850 Instructions Manual

cooking time
6 Cooking time will depend on the type and weight of food.
7 Don't cook more than 500g at a time.
8 We suggest cooking times of 10 minutes per 100g of weight.
9 Cook fish till the flesh is opaque throughout.
10 Use the menu button ] to select R .
11 The default time is 20 minutes.
12 You can use the h and min buttons while the display time is blinking.
13 Use the min button to move the display through the options, 10, 15, 20, 25, 30, 35, 40, 45, 50,
and 55.
14 If you want to cook for 1 hour, press the h button.
15 To undo the 1 hour setting, press the h button again, while the display time is blinking.
, If you do nothing for 2 minutes, the appliance will revert to standby mode.
16 When you have chosen the cooking time, press start v .
17 The display will count down.
18 At the end of the cooking time, the appliance will go into "keep warm" mode.
19 The W light will glow.
20 It's best to remove the food as soon as it has cooked, to prevent it drying out.
21 Open the lid, remove the food, then press stop w .
h STEAMING
1 Fill the bowl with cold water up to the 6 mark.
2 Sit the basket inside the top of the bowl.
3 Put the food into the basket.
4 For uniform cooking, cut all pieces of food to roughly the same size.
5 For peas, or anything that'll break up or drop into the water, make a parcel with aluminium
foil.
6 Take care when removing the parcel – wear oven gloves and use plastic tongs/spoons.
7 Close the lid.
8 Use the menu button ] to select S .
9 Choose the cooking time – these should cook within the 30 minute default time:
food (fresh)
green beans
broccoli
brussels sprouts
cabbage
carrots (sliced)
corn cobs
potatoes (quartered)
cooking times & food safety
10 Cook meat, poultry, and derivatives (mince, burgers, etc.) till the juices run clear. Cook fish till
the flesh is opaque throughout.
11 You should cook leaf vegetables as little as possible, to keep them green and crisp. Plunging
them into iced water will stop the cooking process.
12 The default time is 30 minutes.
13 You can use the h and min buttons while the display time is blinking.
14 Use the min button to move the display through the options, 30, 35, 40, 45, 50, and 55.
15 Use the h button to move the display through the options, 1 and 2.
16 To undo the 2 hour setting, press the h button again, while the display time is blinking.
, If you do nothing for 2 minutes, the appliance will revert to standby mode.
quantity
200g
200g
200g
quarter
200g
2
400g
8