Av Connections And Input Selection; Output Signal For Scart 2 - Toshiba 42PW23P Owner's Manual

AV connections and input selection

Defining your INPUT and OUTPUT sockets so that your television recognises connected equipment.
Most video recorders and decoders send a signal
through the Scart lead to switch the TV to the correct
Input socket. Alternatively press the external source
B
selection button repeatedly until you see the picture
from your equipment. You must use this button to view
equipment connected using the COMPONENT VIDEO
INPUT (EXT 4).
An S e.g. EXT2S, indicates the input is set for an
S-Video signal.
Input Selection
Using the Input Selection if the TV does not switch over
automatically.
Press the button to bring up EXT 1 on the
B
1
screen. This will display the signal coming in
through Scart 1.
Press the button again to select the equipment
B
2
connected to Scart 2 (EXT 2).
And press the button again for EXT 3
B
3
I
(Scart 3, , on the back of the TV or
on the front of the TV) and again for EXT 4
(Component Video Input).
To return to TV mode simply press one of the
4
numbered buttons on the remote control.
To view the external equipment once again,
simply press the
B
external source.
ADDITIONAL FEATURES
J
,
button until you see your
Selecting the INPUT signal
This feature allows you to specify the type of signal going
into Scarts 2 (EXT 2) or 3 (EXT 3) on the back of the
television and the sockets on the front (which are also
EXT 3). Please refer to the manufacturers instructions for
the connected equipment. If the colour is missing try the
alternative setting.
From the
1
with the S or R button select either AV or S-VIDEO
as the required
AV connection
Back
EXT2 input
EXT3 input
EXT2 output
Woofer
Selecting the OUTPUT signal for Scart 2
Again, from the
1
connection.
AV connection
Back
EXT2 input
EXT3 input
EXT2 output
Woofer
Using the S or R buttons change the
2
output option to:
MONITOR = The picture on screen
TV = The last television programme selection.
EXT 1 = The picture from equipment connected
to Scart 1.
EXT 3 = The picture from equipment connected
to Scart 3 or the front input sockets.
15
Feature menu select AV connection
input for EXT2 and EXT3.
S-VIDEO
Feature menu select
S-VIDEO
and
AV
EXT 1
EXT.
AV
AV
EXT 1
EXT.
EXT2