Table of Contents
Advertisement
Connecting and turning on your new TV
Before connecting any external equipment, turn off all main power switches.
WE RECOMMEND THAT YOU USE SCART
LEADS IN ADDITION TO AERIAL CABLES
WHEREVER POSSIBLE
Aerial cables:
Connect the aerial to the socket on the rear of the
television. If you use a decoder* and/or a video
recorder it is essential that the aerial cable is
connected through the decoder and/or through the
video recorder to the television.
Scart leads:
Connect the video recorder IN/OUT socket to the
TV. Connect the decoder TV socket to the TV.
Connect the video recorder SAT socket to the
decoder VCR socket.
Before running
Auto tuning
video recorder to Standby.
O
O
N
N
Y
Y
RED = Power On
GREEN = On Timer is set
ORANGE = Bilingual transmission
being received
GREEN = Stereo transmission
being received
The TV back connections...
put your decoder and
...and switching your new TV on...
On the front of the TV...
If the red power-on light is unlit, press the POWER button on the front of the
TV to switch the set on and then press a number button on the remote
N
N
control to see the screen.
SETTING UP
the back of your TV
SCART 3
SCART 2
SCART 1
TV
video recorder
IN/OUT
...and with the remote control:
Press the Standby Button
This allows you to put the set
into standby mode when leaving
the TV unattended for short
periods of time. To return to TV
i
mode press the
button, or any
of the numbered buttons on
the remote control. The picture
may take a few seconds to appear.
6
decoder*
IN
VCR
OUT
IN
OUT
SAT
i
:
Advertisement
Table of Contents
