Input Selection And Av Connections; Input Signal Selection - Toshiba A3000 Series Manual

Defining the INPUT and OUTPUT sockets so that the television recognises connected equipment. See page 7
for a clear view of the back connection recommendations.
Most media recorders and decoders send a signal
through the SCART lead to switch the television to the
correct Input socket.
Alternatively press the external source selection button
until the picture from connected equipment is shown.
B
This button must be used to view equipment connected
using the COMPONENT VIDEO INPUT (EXT3C).
An S in the display e.g. 2S (EXT 2S), indicates the
B
input is set for an S-Video signal.
Input selection
Use the Input Selection if the television does not switch
over automatically.
At any time by pressing
1
screen showing all stored programmes and
external equipment. Use up and down to
highlight and OK to select.
1 BBC1
PC
HDMI
3C
B
2 DVD
B
1
B
4 CH4
3 ITV
2 BBC2
HDMI displays equipment connected to Input
HDMI on the back of the television. It is designed
for best performance with 1080i high definition
signals.
PC displays a computer connected to Input
RGB/PC on the back of the television.
NOTE: The PC input and Component Video
(EXT3) cannot be connected at the same time.
Input selection and
AV connections
a list will appear on
B
23

INPUT signal selection

This specifies the type of signal going into SCART 2 (EXT2)
on the back of the television. Please refer to the
manufacturers instructions for the connected equipment.
In the SET UP menu press down until
1
AV connection is highlighted, then press OK.
SET UP
Language
Country
Auto tuning
Manual tuning
AV connection
Picture position
Back Watch TV
MENU EXIT
With left or right select either AV or S-VIDEO as
2
the required input for EXT2.
AV connection
PC/HDMI audio
HDMI audio
EXT2 input
Back Watch TV
MENU EXIT
If the colour is missing try the alternative setting.
1/2
English
UK
OK
OK
OK
OK
PC
Digital
AV