CONTROLS AND FEATURES
Sampling Clock
Adjusting the Sampling Clock alters the number of pulses per
scan, this will clear vertical lines on the screen.
a
In the Display Settings menu, press
Settings is highlighted.
b
Q
Press
to select, and then
Clock.
c
C
c
Use
or
to adjust until the picture clears.
Reset
Use Reset to return all items to the original factory settings.
a
In the Display Settings menu, press
Settings is highlighted.
b
Q
Press
to select, and then
c
Q
Press
.
NOTE: When a PC is connected using HDMI, none of
these functions will be available.
The screen is disrupted momentarily when adjusting PC
Settings. This is not a sign of malfunction.
The default settings and adjustment ranges may vary
depending on the input signal format.
b
until PC
b
to highlight Sampling
b
until PC
b
to highlight Reset.
66
Input selection and AV
connections
See page 9 for a detailed image showing
recommended connections.
Most media recorders and decoders send a signal through the
SCART lead to switch the television to the correct Input socket.
Alternatively, press the external source selection button
until the picture from connected equipment is shown.
o
An S in the display e.g.
2S (EXT 2S), indicates the input is set
for an S-Video signal.
Input selection
Use the Input Selection window if the television does not switch
over automatically.
a
o
By pressing
on the remote control or TV, a list will
appear on screen showing all inputs and external
equipment.
o
Pressing
on the
remote control
Inputs
TV
1
2
3
4
HDMI 1
HDMI 2
HDMI 3
HDMI 4
PC
®
HDMI
displays equipment connected to Input HDMI
on the back or side of the television.
PC displays a computer connected to Input RGB/PC on
the back of the television.
o
o
Pressing
on the TV
right side panel
Inputs
DTV Ant (or Cable) TV *
DTV Ant (or Cable) RADIO *
DTV Ant (or Cable) TEXT *
DTV Sat TV *
DTV Sat RADIO *
DTV Sat TEXT *
1
2
3
4
HDMI 1
HDMI 2
HDMI 3
HDMI 4
PC
ATV
* Depends on the type of
channels that are currently
available for DTV.