Table of Contents
Advertisement
Quick Links
POLE HEDGE
TRIMMER
900W 410mm
INSTRUCTION MANUAL
SPECIFICATIONS
Motor:
900W
Input:
230 – 240V ~ 50Hz
No Load Speed:
1000/min
Blade length:
410mm
Max. Blade Capacity: 18mm
Weight (Tool Only):
6.05kgs
ozito.com.au
WHAT'S IN THE BOX
Pole Hedge Trimmer (2 parts)
Blade Cover
Auxiliary D-handle
Auxiliary Straight Handle
Auxiliary Handle Bracket
Shoulder Strap
2 x Assembly
Hex Key
Bolts
PHT- 410
Advertisement
Table of Contents
Related Manuals for Ozito PHT-410
Summary of Contents for Ozito PHT-410
- Page 1 Motor: 900W Input: 230 – 240V ~ 50Hz Auxiliary Straight Handle No Load Speed: 1000/min Blade length: 410mm Max. Blade Capacity: 18mm Auxiliary Handle Bracket Weight (Tool Only): 6.05kgs ozito.com.au Shoulder Strap 2 x Assembly Hex Key Bolts PHT- 410...
-
Page 2: Know Your Product
KNOW YOUR PRODUCT ASSEMBLY POLE HEDGE TRIMMER 1. SHAFT ASSEMBLY 1. Blade 11. Upper shaft 2. Blade angle adjustment handle 12. Auxiliary straight handle 3. Extension cord restraint 13. Lower shaft WARNING!: TO PREVENT ACCIDENTAL STARTING, 4. Rear handle 14. Shaft locking knob ENSURE THAT THE POLE HEDGE TRIMMER IS 5. -
Page 3: Setup & Preparation
SETUP & PREPARATION 2. AUXILIARY HANDLE ASSEMBLY 3. ADJUSTMENTS Assembling the adjustable Adjusting the auxiliary handle auxiliary handle 1. Loosen the two bolts securing the auxiliary handle bracket, 1. Locate the adjustable auxiliary adjustable auxiliary D-handle D-handle and adjustable auxiliary and adjustable auxiliary straight handle onto the lower shaft straight handle. -
Page 4: Operation
OPERATION 4. USING THE POLE HEDGE TRIMMER Adjusting the blade angle WARNING!: IF CORDSET IS CUT OR DAMAGED REMOVE IT IMMEDIATELY FROM THE POWER WARNING!: DO NOT HOLD THE BLADE IN AN POINT. THIS PRODUCT REQUIRES THE USE OF TWO ATTEMPT TO ADJUST THE BLADE ANGLE. - Page 5 5. TRIMMING Switching on/off Trimming Instructions WARNING!: NEVER USE THE POLE HEDGE CAUTION!: TO REDUCE THE RISK OF ELECTRIC TRIMMER WHEN STANDING ON A LADDER OR SHOCK, WE RECOMMEND THE USE OF A RESIDUAL UNEVEN GROUND. CURRENT DEVICE (RATED AT 30MA OR LESS). WARNING!: FAMILIARISE YOURSELF WITH SURROUNDING HAZARDS SUCH AS POWER...
-
Page 6: General Maintenance
A HARD OBJECT, VISUALLY INSPECT THE BLADE Note: Ozito Industries will not be responsible for any damage or injuries FOR DAMAGE. IF THE BLADE IS DAMAGED, DO NOT caused by the repair of the tool by an unauthorised person or by CONTINUE TO OPERATE THE POLE HEDGE TRIMMER. -
Page 7: Description Of Symbols
Shaft Locking Knob SPPHT410-011 Carbon Brush (set) SPPHT410-045 Lock-off Switch SPPHT410-051 Shoulder Strap SPPHT410-123 For further information, or any parts not listed here, visit www.ozito.com.au or contact Ozito Customer Service: Australia 1800 069 486 New Zealand 0508 069 486 E-mail: enquires@ozito.com.au... - Page 8 Tool: SPARE PARTS Model No. The following is a list of spare parts carried by Ozito. Please contact Customer Service for any parts not listed. Item Item Description Part No. Description Part No. Shaft Locking Knob SPPHT410-011 Carbon Brush (set)
-
Page 9: Electrical Safety
ELECTRICAL SAFETY WARNING! When using mains-powered tools, basic safety precautions, including The power supply for this product should be protected by a residual current device (rated at the following, should always be followed to reduce risk of fire, electric shock, 30mA or less). -
Page 10: Warranty
• Failure to perform maintenance as set out within the instruction manual. • If the tool is disassembled or tampered with in any way. • Professional, industrial or high frequency use. OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175. 1014...
Need help?
Do you have a question about the PHT-410 and is the answer not in the manual?
Questions and answers