Computherm Q8RF(TX) Operating Instructions Manual page 17

A BRIEF DESCRIPTION OF PROGRAMMING
• Setting the date and time: press the "DAY" button, then adjust values using the
"DAY", and
• Programming: press and hold down the "SET" button, while pressing the
"PROG" button too, then adjust values with the "PROG",
buttons; use the "COPY" button to copy repeated programmes.
• Program inspection: using the "PROG",
• Retuning: using the "1", "2", "3", "4", "SET", "DAY" and "COPY" buttons (see
Section 9.2).
• Transmission distance control: press the "TEST" button for more than 2
seconds.
• Temporary modification of the temperature set in the program:
• until the next switch in the program: set the temperature using the
and buttons.
• for a period of 1 to 9 hours: set the temperature using the
buttons, then press the "DAY" button, and finally set the duration using the
and
• for a period of 1 to 99 days: set the temperature using the
buttons, then press the "HOLD" button and hold it down for 2 seconds, and
finally set the duration using the
• until the next interference: set the temperature using the
buttons, then press the "HOLD" button briefly.
The COMPUTHERM Q8RF(TX) type thermostat complies
with the requirements of standards EU EMC 2004/108/EC;
LVD 2006/95/EC; and R&TTE 1999/5/EC
For better reading download this Operating
Instruction from our website!
buttons.
buttons.
Importer:
Thermostats4U
Email: sales@thermostats4u.co.uk
For additional information visit:
thermostats4U.co.uk
and
and
- 17 -
and
buttons.
and
and
buttons.
and