Tool Kit - Pacific PV-12 Operating & Maintenance Instructions

1
2
19
ITEM PART NO. DESCRIPTION
1 600206 Adaptor, 1-1/2 Hose, Vac End
Hose, 1-1/2x10ft.
2 604108
Hose Asm,1-1/2x10ft.(
604114
3 600205 Adaptor, 1-1/2 Hose, Wand End
4 609810 Wand Asm., with Adaptor & Pin
609813 Wand Half w/out Adaptor (top half)
609809 Wand Half w/Adaptor & Pin (bottom half)
5 606710 Disconnect Pin Assembly
6 600204 Adaptor, Wand
7 608810 16" Bristle Floor Tool Asm.-Optional
8 601803 Top Casting with Adaptor
9 601804 Base Casting, Bristle Tool
10 600901 Brush, Bristle Tool
11 602011 Clamp, Brush
12 600701 Blade, Squeegee Pickup
14 607212 Retainer
15 601802 Base Casting-Squeegee Tool
16 608812 16" Squeegee Floor Tool Asm.
17 608816 1-1/2" Crevice Tool
18 608820 3" Round Dusting Tool
19 600210 Tool Adaptor, 1-1/4 to 1-1/2
20 608811 16" Carpet Tool Asm.
21 607901 Carpet Shoe
22 600902 Brush Strip
23 964022 Screw
24 962115 10-24x3/8 Self-Tapping Screw
PART #608809
3
17
4
18
8
15
16
14
QTY.
(w/out adaptors)
w/adaptors)

TOOL KIT

8
5
6
12
24
23
1
TOOL KIT ASSEMBLY:
1
1. Connect the hose to the collector tank by inserting the large,
1
grooved hose adapter end into the tank adapter. Press the
1
pawl (#35 on Wet/Dry Vac) to allow the hose adapter to slide
1
further in. Release the pawl to engage the large groove.
2. Insert the upper wand half firmly into the lower wand as-
1
sembly. The dimple on the lower wand aligns with the
1
groove of the upper half to assure a rigid fit.
1
3. Insert the wand end into the free end of the vacuum hose.
1
Then fasten the proper floor tool to the to the wand by in-
1
serting the mating end of the floor tool into the adapter
2
collar of the wand assembly. Pull the tool locking pin to
2
allow total engagement of the adapter and tool. Release the
2
pin to lock the tool to the wand.
1
1
4. The hand tools may also be used by inserting their adapter
1
directly into the free end of the vacuum hose.
1
1
5. Tool Selection: Choosing the proper tool will give the best
1
results. To vacuum dust and debris from floors or walls-
1
select the bristle floor tool. To remove water, liquid waste,
1
strip solution, etc. from hard surfaced floors-use the squee-
6
gee floor tool. When vacuuming carpets or rugs-choose the
5
carpet tool.
5
9
21
20
22
23
7 - 16" Bristle Floor
Tool Accessory
9
8
10
11
23
Not included with machine.