Tenda teg2124t User Manual page 16

Wireless range extender
Hide thumbs Also See for teg2124t:
Table of Contents

Advertisement

2. If the wireless range extender isn't connected to the remote router within
20 seconds, the wireless range extender's DHCP server will be enabled
automatically. The wireless range extender will get the IP assigned from
the wireless range extender itself. Thus, you can't access to the Internet.
3. When bridged successfully, the range extender's SSID and security mode
will be the same as that of the remote router.
-----------------------------------------------------------------------------------------------
AP Mode
In this mode, the wireless range extender is connected to the remote router
for Internet access via an Ethernet cable. And your PC is connected to the
wireless range extender via a wired or wireless connection. The network
topology is shown below:
Configuration procedures:
1.
Select AP Mode and click Next;
2.
Configure the fast settings: channel, security mode and security key.
Click Save.
Chapter 2 Internet Connection Setup
10

Advertisement

Table of Contents
loading

Table of Contents