Product Profile; Introduction; Features Highlights; Preparing The Mavic Pro - dji Mavic pro User Manual

Product Profile

Introduction

The DJI Mavic Pro is DJI's smallest flying camera, featuring a fully stabilized camera, Intelligent
Flight Modes and Obstacle Avoidance inside a revolutionary folding design. It captures 4K videos
and 12 megapixel photos, and is capable of both ActiveTrack
shots effortless.
Mavic Pro boasts a maximum flight speed of 40 mph (65 kph) and a maximum flight time of 27
minutes*.
* Maximum flight time was tested in 0 wind at a consistent 15.5 mph (25 kph). This value should be taken
for reference only.

Features Highlights

The Mavic Pro is an ultra-portable aircraft thanks to its revolutionary folding design.
Camera and Gimbal: With the Mavic Pro, you are shooting 4K video at up to 30 frames per second and
capturing 12 megapixel photos that look crisper and cleaner than ever, all stabilized by the compact on-
board gimbal.
Flight Controller: The next-generation flight controller has been updated to provide a safer, more reliable
flight experience. The aircraft is able to automatically return to its home point when transmission signal is
lost or battery level is low. Apart from being able to hover in door at low altitudes, the aircraft is also able
to sense and avoid obstacles on its route, enhancing safety.
HD Video Downlink: Built into the Remote Controller is DJI's latest long-range transmission technology
OCUSYNC , offering a maximum transmission range of 4.3 mi (7 km) and making it possible to control
TM
your aircraft up and stream video to your mobile device at 1080p.

Preparing the Mavic Pro

All arms of the aircraft are folded on delivery. Follow the instructions below to unfold all the arms.
Preparing Aircraft
Remove the gimbal cover and gimbal clamp from
the camera.
The gimbal cover is used to protect the gimbal. Remove it when necessary.
Use the Gimbal Clamp and Gimbal Cover to protect the gimbal when the Mavic Pro is not in use.
Attaching the Propellers
Attach the white ringed propellers to the mounting base with white marks. Press the propeller down onto
the mounting plate and rotate in the lock direction until it is secured. Attach the other propellers to the
mounting base without marks.
6
©
2016 DJI All Rights Reserved.
and TapFly making complex
TM TM