Chapter 1
Set the region
Along with the Language setting, the Region setting
determines the default date format and the format of the
video signal for displaying camera images on a
television when connected through an optional
HP Photosmart Premium camera dock or wireless dock
base (see
Use
Set the date and time
1.
2.
3.
To change the date and time later, use the Setup
Menu (see
Install and format an optional memory card
1.
2.
3.
Always format memory cards before first use.
1.
2.
3.
4.
For information about supported memory cards, see Storage under
on page
Install the software
8
Downloaded From camera-usermanual.com HP Manuals
Using the Setup Menu on page
to choose the region you want, then press
.
Use
to adjust the highlighted value.
Use
to move to the other selections and repeat
Step 1 until the date and time are set correctly.
Press
when the date, time, and format settings
are correct, then press
Using the Setup Menu on page
Turn off the camera and open the Battery/Memory
card door.
Insert the optional memory card in the smaller slot
as shown. Make sure the memory card snaps into
place.
Close the Battery/Memory card door and turn on the
camera.
With the camera turned on, press
corner of the Image Display. This indicates you are in Playback.
Press
.
Use
to select Format Card, then press
Use
to select Yes, then press
Note
Once you install a memory card, all new images and video clips are stored
on the card, rather than in internal memory. To use internal memory and view
images stored there, remove the memory card. To transfer images from internal
memory to an optional memory card, see Move Images to Card under
Playback Menu on page
52.
Note
If you have trouble installing or using the HP Photosmart Software, see
the HP Customer Care website for more information: www.hp.com/support.
39).
again to confirm.
39).
until
.
to format the card.
25.
appears briefly in the upper right
Specifications
Using the