Choose The Language; Set The Region; Set The Date And Time; Install And Format An Optional Memory Card - HP Photosmart R927 User Manual

Chapter 1

Choose the language

Use
press
To change the language later, use the Setup menu (see
Using the Setup Menu on page

Set the region

Along with the Language setting, the Region setting
determines the default date format and the format of the
video signal for displaying camera images on a
television when connected through an optional
HP Photosmart Premium dock or wireless dock base
(see Using the Setup Menu on page
Use
.

Set the date and time

1.
Use
2. Use
Step 1 until the date and time are set correctly.
3.
Press
are correct, then press
To change the date and time later, use the Setup
Menu (see

Install and format an optional memory card

1. Turn off the camera and open the Battery/
Memory card door.
2. Insert the optional memory card in the smaller
slot as shown. Make sure the memory card
snaps into place.
3. Close the Battery/Memory card door and turn
on the camera.
Always format memory cards before first use.
1.
With the camera turned on, press
corner of the Image Display. This indicates you are in Playback.
2.
Press
3.
Use
4.
Use
8
Downloaded from ManualsCamera.com Manuals
to choose the language you want, then
.
to choose the region you want, then press
to adjust the highlighted value.
to move to the other selections and repeat
when the date, time, and format settings
Using the Setup Menu on page
to access the
to select Format Card, then press
to select Yes, then press
41).
41).
again to confirm.
41).
until
Delete sub-menu.
.
to format the card.
appears briefly in the upper right