Removing The Optical Drive - Dell PowerEdge T130 Owner's Manual

Figure 17. Removing the optical drive filler
1. optical drive bay
3. optical drive filler
Next steps
1. Install the hard drive cage.
2. Reconnect the disconnected data and power cables to the hard drives and optical drive.
3. Install the bezel.
4. Reconnect all peripherals disconnected from the control panel assembly.
5. Follow the procedure listed in
Related links
Removing the bezel
Removing the hard drive cage
Installing the hard drive cage
Installing the bezel

Removing the optical drive

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1. Ensure that you follow the
After working inside your
Safety instructions.
2. tabs (4)
4. hard drive cage
system.
59