Installing A Hard Drive Carrier Into The Hard Drive Bay - Dell PowerEdge T130 Owner's Manual

Figure 12. Removing and installing hard drive carrier from the hard drive bay
1. hard drive
3. hard drive power and data cables (2)
Next steps
1. Install the hard drive carrier into the hard drive bay.
2. If disconnected, connect the power and data cables to the hard drives in the hard drive bay.
3. Follow the procedure listed in
Related links

Installing a hard drive carrier into the hard drive bay

Installing a hard drive carrier into the hard drive bay
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1. Ensure that you follow the
2. Follow the procedure listed in
52
After working inside your
Safety instructions.
Before working inside your
2. retention clips on hard drive carrier (2)
system.
system.