Table of Contents
Advertisement
Installation Procedure
2.4.
Network Configuration
The default IP address of a webMCA is 192.168.1.2. To change this address the "WebMCA
Config" utility has to be used. It can be found using the start button in the program folder "FAST
ComTec WebMCA"
Figure 2.3: WebMCA Config utility
The entries for user name and password in the login dialog are not evaluated currently and can be
left blank. After pushing the "Connect" button the firmware and hardware revision will be displayed
on success.
Selecting the "Configuration" page several network related properties can be changed.
The IP address should be set to match the used intranet. To allow a time synchronization a NTP
server IP address can be specified as well as a poll interval for the NTP requests.
The webMCA uses UTC time internally. When spectra are transferred to the winTMCA32 to start
and stop time are adjusted to the local time of the PC with respect to the time zone and daylight
saving settings.
ComTec GmbH
2-3
Advertisement
Table of Contents
