Table of Contents
Advertisement
The file WEBMCAA.CFG contains a complete list of commands for setting parameters; an
example is:
range=4096
rtpreset=1000
rtprena=0
ltpreset=1000
ltprena=0
roipreset=0
roiprena=0
roimin=0
roimax=2048
autoinc=0
datname=test2.dat
savedata=0
fmt=dat
smoothpts=5
A data header file with extension .MCD contains a subset of above parameters and some
additional information typical for the special measurement. An example is the file Sd0002.MCD:
REPORT-FILE from 11/22/94 13:52:56 written 01/30/96 9:57:55
REPORT-FILE from 11/22/94 13:52:56 written 01/30/96 9:57:55
REALTIME:
3012.000
LIFETIME:
3000.000
TOTALSUM:
1870706
ROISUM:
1870706
NETTOSUM:
1858424
cmline0= 11/22/94 13:52:56
cmline1=2
cmline2=Calibration source
cmline3=Oberhaching
cmline4=1/1/93 12:00:00
cmline5=10
cmline6=mg
ComTec GmbH
Windows Server Program
; Memory size for spectra
; Realtimepreset value (seconds)
; Realtime preset enable (1=enabled)
; Lifetime preset value (seconds)
; Lifetime preset enable
; ROI preset value
; ROI preset enable
; ROI lower limit (inclusive)
; ROI upper limit (exclusive)
; Enable Auto increment of filename
; Filename
; Save at Halt
; Format (ASCII: asc, Binary: dat, GANAAS: spe)
; Number of points to average for a smooth operation
; the first time is when the measurement was started,
nd
; the 2
when the data file was written
; the first time is when the measurement was started,
nd
; the 2
when the data file was written
; real time in seconds
; life time in seconds
; total sum of counts
; sum of counts in ROI
; sum in ROI with background subtracted
; comment lines: the first line always contains the start time
4-5
Advertisement
Table of Contents
