Table of Contents
Advertisement
Connections
Receiving system connection procedure
1.
Connect the AW-PS301 AC adapter to the DC 12V IN
connector on this adapter.
2.
Connect the TO MODEM connector to the RS-232C
connector on the modem using the RS-232C cable
provided with the modem.
3.
Connect the telephone line to the line input jack on the
modem.
4.
Connect the pan-tilt head to this adapter.
O If the connection distance between this adapter and
the AW-PH300A pan-tilt-head is 10 m or less, use
the AW-CA28T9 (10 m) cable to connect the RS-
232C CONTROL OUT connector on this adapter to
the P/T CONTROL IN connector on the AW-PH300A.
O If the connection distance between this adapter and
the AW-PH300A pan-tilt-head is more than 10 m, use
an RS-232C/RS-422 converter between the RS-422
CONTROL OUT connector on this adapter to the P/T
CONTROL IN connector on the AW-PH300A when
performing the connection.
O When the AW-PH350 pan-tilt-head is used, use a 10
BASE-T cable to connect the RS-422 CONTROL
OUT connector on this adapter to the CONTROL IN
IP/RP connector on the AW-PH350.
When an AW-RP301 or AW-RP501 is used as the
controller, connect the pan-tilt head to the P1
CONTROL OUT connector on this adapter.
5.
Set the power switch on the AW-DU600 to ON.
6.
Dial Up Adapter settings
1 Set this adapter to receive mode.
Press the
MENU+
the menu settings.
When "Menu-1 Function" appears on the LCD panel,
use the !
START
Rx (receive mode).
M e n u j 1 F u n c t i o n
T x R x D i r e c t
2 Select the pan-tilt head system control.
Press the
MENU+
the menu setting item.
When "Menu-5 Output-1" appears on the LCD panel,
use the !
START
RS-2332C or RS-422 according to operating
conditions.
M e n u j 5 O u t p u t j 1
R S j 2 3 2 C R S j 4 2 2
When the settings are completed, press the
key (
) once again to exit the menu
START
i
2
settings.
key (
) to open
START
i
2
# keys and select
STOP
key (
) to change
START
i
2
# keys and select
STOP
MENU+
7.
Set the power switch on the modem and the pan-tilt
head to ON.
8.
"OK" appears on the LCD panel.
M o d e :
O K
If the modem is not connected correctly, [---] will appear
on the LCD panel.
M o d e :
j j j j j j
11
R e c e i v e r
R e c e i v e r
Advertisement
Table of Contents
