Starting The Memory; Changing The Basic Settings; Basic Settings; Care And Cleaning - Siemens HF25G5L2 Instruction Manual

Starting the memory

You can start cooking at any time using the settings saved for
your meal.
Ž
1. Press the button.
Your appliance is ready for use.
j k
2. or ( button.
The stored settings are displayed.
3. Press the start button.
The memory setting starts. The
in the display.

Changing the basic settings

Your appliance has various basic settings which you can
change at any time.

Basic settings

In the table, you will find all the basic settings and options for
changing them.
Basic setting
™‚
Clock display
‚
= on
™ƒ
Signal duration
ƒ
= medium = 2 minutes
™„
Button tone
‚
= on
™...
Waiting time
ƒ
= medium = 5 seconds
Prerequisite: your appliance is switched off.
0
1. Press and hold the button for a few seconds.
The first basic setting appears in the display.
You can change the basic setting by turning the rotary
2.
selector.

Care and cleaning

With careful care and cleaning your microwave oven will retain
its looks and remain good order. We will explain here how you
should care for and clean your appliance correctly. :
Risk of electric shock.!
Penetrating moisture may cause an electric shock. Do not use
any high-pressure cleaners or steam cleaners.
:
Risk of burns!
Never clean the appliance immediately after switching off. Let
the appliance cool down.
:
Risk of injury!
Scratched glass in the appliance door may develop into a
crack. Do not use a glass scraper, or sharp or abrasive
cleaning aids or detergents.
x
cooking time counts down
Options
Clock display
ƒ
= off
‚
= short = 10 seconds
„
= long = 5 minutes
Button tone
ƒ
= off
‚
= short = 2 seconds
„
= long = 10 seconds
Note: Once operation has started, you can no longer change
the memory location.
The cooking time has elapsed.
A signal sounds. The memory function has finished. Use
Ž
the button to switch off the appliance or make new
settings. You can stop the audible signal by pressing the
button.
Pausing
Press the STOP button or open the appliance door. Operation
is suspended. After closing, press the start button. Operation
will then continue.
Explanation
Displays the clock
Audible signal after the cooking time has
elapsed
Confirmation tone when a button is pressed
Waiting time between two separate steps,
after setting
Confirm by pressing the
3.
The next basic setting appears in the display. You can go
through all of the basic settings with the
changes with the rotary selector.
To finish, press and hold the
4.
All settings are applied.
You can change the settings at any time.
Notes
Slight differences in colour on the front of the appliance are
■
caused by the use of different materials, such as glass,
plastic and metal.
Shadows on the door panel which look like streaks, are
■
caused by reflections made by the oven light.
Enamel is baked on at very high temperatures. This can
■
cause some slight colour variations. This is normal and does
not affect their function. The edges of thin trays cannot be
completely enamelled. As a result, these edges can be
rough. This will not impair the anti-corrosion protection.
Unpleasant odours, e.g. after fish has been prepared, can be
■
removed very easily. Add a few drops of lemon juice to a cup
of water. Place a spoon into the container as well, to prevent
delayed boiling. Heat the water for 1 to 2 minutes at
maximum microwave power.
0
button.
0
button and make
0
button for a few seconds.
0
9