Sony PXW-Z100 Operating Manual page 50

System
Menu items Sub items and setting values Contents
Clock Set
Time Zone
Setting the built-in
clock
Date Mode
12H/24H
Date
Time
Country NTSC/PAL Area
Setting the region
Hours Meter
Hours(System)
Displaying the
Hours(Reset)
hours meter
Reset
Basic User Name
Authentication
Setting basic
Password
authentication of
the network
Wi-Fi
Wi-Fi
Setting for Wi-Fi
connection and
SSID & Password
respective display
Wi-Fi Direct Connection
items
Client
IP Address
Subnet Mask
MAC Address
Regenerate Password
All Reset Reset
Resetting to the
factory status
Version Number
Showing the
version of this
Version Up
camcorder
50 Setup Menu List
UTC –12:00 Kwajalein to UTC
+14:00
YYMMDD / MMDDYY /
DDMMYY
12H / 24H
Execute / Cancel
(admin)
(pxw-z100)
Enable / Disable
Execute / Cancel
10.0.0.1
255.255.0.0
Execute / Cancel
Execute / Cancel
Vx.xx
Execute / Cancel
Sets the time-zone difference from UTC in steps of 30
minutes.
Selects the display mode of the date.
YYMMDD: In sequence of year, month, day
MMDDYY: In sequence of month, day, year
DDMMYY: In sequence of day, month, year
Selects the display mode of time.
12H: 12-hour mode
24H: 24-hour mode
Sets the current date.
SET: Sets the date.
Sets the current time.
SET: Sets the time.
Sets the region in which you use the camcorder.
Execute: Execute this function.
Displays the non-resettable accumulated time of use.
Displays the resettable accumulated time of use.
Resets the "Hours(Reset)" value to 0.
Execute: Execute resetting.
Sets a desired user name (1 to 16 alphanumeric characters).
SET: Sets the user name.
Sets the password (1 to 16 alphanumeric characters).
SET: Execute this function.
Selects whether to enable the Wi-Fi connection or not.
Displays the SSID and password.
Starts processing the connection by Wi-Fi Direct.
Execute: Executes this function.
Displays the connected client device (device name or Mac
address).
Displays the IP address of the camcorder.
Displays the subnet mask of the camcorder.
Displays the MAC address of the Wi-Fi module of the
camcorder.
Regenerates the password.
Execute: Executes this function.
Resets the camcorder to the factory status.
Execute: Executes resetting.
Displays the current software version of the camcorder.
Upgrades the camcorder*.
Execute: Executes.
* Upgrade is the function for updating the software of the
camcorder.