Sony PXW-Z100 Operating Manual page 27

Playing a recorded clip
You can play the recorded clip while the
camcorder is in standby mode.
1
Insert the XQD memory card.
2
Press the PLAY/PAUSE button of the
playback control buttons.
3
Search for the desired clip by pressing
PREV or NEXT button.
4
Press the PLAY/PAUSE button.
The playback image appears on the
viewfinder.
Playback operation is performed as follows.
PLAY/PAUSE button: Pauses playback. To
resume playback, press this button again.
F FWD button/F REV button: Plays fast. To
return to normal playback, press the PLAY/
PAUSE button.
STOP button: Stops playback or recording.
Monitoring audio
In normal playback mode, you can monitor the
recorded audio signals through the connected
headphones.
You can select audio channel to be monitored and
adjust the sound volume with "Audio Output"
(page 43) in the Audio menu.
Cueing Up
To start playback from the top of the clip
Press the PREV button or NEXT button of the
playback control buttons (page 9). You can cue to
the top of a desired clip by pressing either button
repeatedly.
Switching the XQD memory cards
When two memory cards are loaded, press the
select button (page 8) to switch memory cards.
Notes
• You cannot switch XQD memory cards during
playback.
Continuous playback of cards in slots A and B is not
possible.
Clip (recording data)
When you stop recording, video, audio and
subsidiary data from the start to end of the
recording are recorded as a single clip on an
XQD memory card.
Clip name
For each clip recorded with this camcorder, a
clip name is automatically generated as "Clip" +
a four-digit number.
The number is automatically incremented.
Maximum duration of a clip
The maximum clip length is 13 hours.
The maximum continuous recording time for a
movie is approximately 13 hours. If recording
time reaches approximately 13 hours, the
recording will stop.
Basic Operation Procedure 27