Speakers - HP 17-p000 Maintenance And Service Manual

Speakers

Description
Speaker Kit (includes left and right front speakers and cables)
Before removing the speakers, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the optical drive (see
6. Remove the top cover from the base enclosure (see
7. Remove the WLAN module (see
8. Remove the system board (see
Remove the speakers:
1. Turn the computer, with the front edge toward you.
2. Remove two screws (1).
3. Disengage the cables, and then remove the front speakers (2).
Reverse this procedure to install the speakers.
54 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 30),
Optical drive on page
WLAN module on page
System board on page
31).
Base enclosure on page 34).
44).
51).
Spare part number
763717-001