HP 17-p000 Maintenance And Service Manual page 68

8. Remove the system board (see
9. Remove the fan (see
Remove the heat sink:
▲ Loosen the seven captive screws in the order listed on the heat sink (1), and then remove the heat sink
(2).
NOTE:
heat sink is marked with the order the screws should be removed in. Follow the order shown.
NOTE:
Reverse this procedure to install the heat sink.
60 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
System board on page
Fan on page
The heat sink may vary by computer model and may have a different number of screws. The
There is thermal paste between the heat sink and the processor.
51).
58).