Table of Contents
Advertisement
Memory modules
Description
2 GB memory module
4 GB memory module
8 GB memory module
Before removing a memory module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the optical drive (see
6.
Remove the top cover from the base enclosure (see
7.
Remove the WLAN module (see
8.
Remove the system board (see
Remove the memory module:
1.
Turn the system board over.
2.
Spread the retaining tabs (1) on each side of the memory module slot to release the memory module.
(The memory module tilts up.)
CAUTION:
components on the memory module.
Battery on page
Optical drive on page
WLAN module on page
System board on page
To prevent damage to the memory module, hold it by the edges only. Do not touch the
30),
31).
Base enclosure on page
44).
51).
Component replacement procedures
Spare part number
691739-005
691740-005
693374-005
34).
55
Advertisement
Table of Contents
