Timer; Automatic Switch-Off; Basic Settings For The Hob - Bosch HCE8584.1A Instruction Manual

Timer

You can use the timer in two different ways:
for automatic hotplate switch-off.
■
as a kitchen alarm.
■
Automatic hotplate switch-off
Enter a cooking time for the relevant hotplate. When the
cooking time has elapsed, the hotplate switches off
automatically. You can set a cooking time of up to 99 minutes.
Selecting a hotplate and setting the heat setting.
1.
Touch the 0 symbol.
2.
min appears in the timer display.
‹‹
heat setting display for the cooking time.
To select another hotplate, touch the
until lights up over the required heat setting display.
x
Touch the @ or A symbol on the timer.
3.
The default value appears.
Symbol = 30 minutes
@
Symbol = 10 minutes
A
Touch the or symbol again until the correct cooking time
@ A
4.
appears on the timer display.
After a few seconds, the timer starts counting down.
When the cooking time has elapsed, the hotplate switches off.
You will hear a signal.
‹‹
ten seconds. lights up brightly. Touch the
x
displays go out and the audible signal ceases.
To correct or delete the cooking time: touch the
repeatedly until x lights up brightly over the relevant heat
setting display. Change the cooking time using the
symbol or set to ‹‹ min.
To set a cooking time for another hotplate:
Touch the 0 symbol repeatedly until
the relevant heat setting display. Set the cooking time.

Basic settings for the hob

Your appliance has various basic settings, which you can
adjust to suit your needs at any time.
Display Function
Automatic childproof lock
™‚
The hob is always locked when it is switched off.
Audible signal
™ƒ
Short tone that confirms that a symbol has been touched
or a long tone that indicates that the hob was operated
incorrectly.
Automatic timer
™†
All hotplates switch off after a preselected cooking time.
Length of the timer end signal
™‡
Signal indicates that the time has elapsed or that a hot-
plate has been switched off automatically.
* Basic setting
14
lights up over the
x
symbol repeatedly
0
min. lights up in the timer display for
symbol. The
0
0 symbol
@
x lights up brightly over
Displaying the cooking time for several hotplates:
Touch the
0
the required heat setting display. The remaining cooking time
for this hotplate is displayed.
Automatic timer
You can use this function to preselect a cooking time for all
hotplates. Each time a hotplate is switched on, the preselected
cooking time counts down. When the cooking time has
elapsed, the hotplate switches off automatically.
You can find out how to activate the automatic timer in the
Basic settings section.
You can switch off the automatic timer for a hotplate or change
the cooking time. To do this, touch the
until lights up brightly above the relevant heat setting
x
display. Use the
reset it to
‹‹
Timer
The timer is independent of all other settings on the hob. It
operates in the same way as a normal kitchen timer. When the
set time has elapsed, a signal sounds. You can set a time of up
to 99 minutes.
Touch the
1.
timer.
min appears in the timer display.
‹‹
Touch the
2.
The default value appears.
@ symbol: 10 minutes
A symbol: 05 minutes.
Use the @
3.
A signal sounds once the time has elapsed.
in the display,
10 seconds.
To change or cancel the time:
Touch the 0
Use the @ or

Automatic switch-off

If a hotplate is in operation for a long time without the setting
being changed, the automatic switch-off is activated.
The hotplate stops heating.
or A
setting display.
To resume heating, touch any symbol. The display goes out.
You can make new settings.
At what point the switch-off is activated depends on the heat
setting selected (1 to 10 hours).
Options
= no*
‹
= yes
‚
= all audible signals switched off
‹
= confirmation signal switched off, incorrect opera-
‚
tion signal switched on
= all audible signals switched on*
ƒ
= switched off*
‹‹
= time after which the hotplates should switch off
-
‹‚ ŠŠ
= 10 seconds*
‚
= 30 seconds
ƒ
= 1 minute
„
symbol repeatedly until
x
or symbol to change the cooking time or
@ A
min.
symbol repeatedly until
0
@ or A symbol.
or A symbol to set the time.
lights up brightly. The display goes out after
S
symbol repeatedly until S
A symbol to change the time or set it to
and flash alternately in the heat
" ‰
lights up brightly over
symbol repeatedly
0
lights up for the
S
min. appears
‹‹
lights up.
‹‹ .