Software Installation - BIO RAD VERSADOC User Manual

Connecting the AIA Cable to the Computer:
To do this, two things must happen:
i. The software must be installation on the PC which will control this system
ii.
The PCI Digitizing card must be installed into the PC where the AIA cable is
to be connected

Software Installation:

Please follow the instructions below to install the PC or Mac software for VersaDoc
system:
NOTE: Do not install the PCI card into the PC yet. First install the drivers as
shown below and then install the PCI Card.
PC: based VersaDoc systems:
a. Insert "The Discovery Series" software CD into the CD ROM drive of the PC.
It will go into AUTO RUN mode and the following window will open:
b. Click on "NEXT" the following window will open:
.
User's Manual • 3-15