Usb Mass Storage Driver Support; F81866 Super Io Configuration; Serial Port Configuration - IBASE Technology MI981 User Manual

BIOS SETUP
EHCI Hand-off
This is a workaround for OSes without EHCI hand-off support. The
XHCI ownership change should be claimed by EHCI driver.

USB Mass Storage Driver Support

Enable/Disable USB Mass Storage Driver Support.
USB Transfer time-out
The time-out value for Control, Bulk, and Interrupt transfers.
Device reset tine-out
USB mass Storage device start Unit command time-out.
Device power-up delay
Maximum time the device will take before it properly reports itself to the
Host Controller. 'Auto' uses default value: for a Root port it is 100ms, for
a Hub port the delay is taken from Hub descriptor.

F81866 Super IO Configuration

Advanced
Main
Super IO Configuration
F81866 Super IO Chip
► Serial Port 1 Configuration
► Serial Port 2 Configuration
► Serial Port 3 Configuration
► Serial Port 4 Configuration
► Serial Port 5 Configuration
► Serial Port 6 Configuration

Serial Port Configuration

Set Parameters of Serial Ports. User can Enable/Disable the serial port
and Select an optimal settings for the Super IO Device.
40
Aptio Setup Utility
Chipset Boot
F81866
MI981 User's Manual
Security Save & Exit
→ ←
Select Screen
↑↓ Select Item
Enter: Select
+- Change Field
F1: General Help
F2: Previous Values
F3: Optimized Default
F4: Save ESC: Exit