Using Two Cards - FujiFilm X-T2 Owner's Manual

Using Two Cards

The camera can be used with two cards, one in each
of its two slots. At default settings, photos are saved
to the card in the second slot only when the card in
the fi rst slot is full. This can be changed using D SAVE
DATA SETTING > CARD SLOT SETTING (STILL IMAGE).
Option Option
The card in the second slot is used only when
the card in the fi rst slot is full. If the second slot
is selected for D SAVE DATA SETTING >
SEQUENTIAL
SWITCH SLOT (SEQUENTIAL), recording
(default)
will start on the card in the second slot and
switch to the fi rst slot when the card in the
second slot is full.
Each picture is recorded twice, once to each
BACKUP
card.
As for SEQUENTIAL, except that the RAW
copy of pictures taken with FINE + RAW or
NORMAL + RAW selected for H IMAGE
RAW/JPEG
QUALITY SETTING > IMAGE QUALITY
will be saved to the card in the fi rst slot and
the JPEG copy to the card in the second slot.
The card used to store movies can be selected using
D SAVE DATA SETTING > MOVIE FILE DESTINATION.
Inserting Memory Cards
Description Description
2
Display Display
37