FujiFilm X-T2 Owner's Manual page 284

Setting Setting
A
Flash control
mode
(group A)
B
Flash control
mode
(group B)
C
Flash control
mode
(group C)
10
264
Choose fl ash control modes for groups A, B, and C.
TTL% is available for groups A and B only.
•
TTL: The units in the group fi re in TTL mode. Flash
compensation can be adjusted separately for
each group.
•
TTL%: If TTL% is selected for either group A or B,
you can specify the output of the selected group
as a percentage of the other and adjust overall
fl ash compensation for both groups.
•
M: In mode M, the units in the group fi re at the
selected output (expressed as a fraction of full
power) regardless of subject brightness or cam-
era settings.
•
MULTI: Choosing MULTI for any group sets all the
units in all groups to repeating fl ash mode. All
units will fi re multiple times with each shot.
•
OFF: If OFF is selected, the units in the group will
not fi re.
Description Description