FujiFilm X-T2 Owner's Manual page 278

Setting Setting
C
Flash mode
(TTL)
D
Sync
10
258
Choose a fl ash mode for TTL fl ash control:
•
FLASH AUTO: The fl ash fi res only as required; fl ash
level is adjusted according to subject brightness.
A p icon displayed when the shutter button is
pressed halfway indicates that the fl ash will fi re
when the photo is taken.
•
STANDARD: The fl ash fi res with every shot if pos-
sible; fl ash level is adjusted according to sub-
ject brightness. The fl ash will not fi re if not fully
charged when the shutter is released.
•
SLOW SYNC.: Combine the fl ash with slow shutter
speeds when photographing portrait subjects
against a backdrop of night scenery. The fl ash
will not fi re if not fully charged when the shutter
is released.
Choose whether the fl ash is timed to fi re imme-
diately after the shutter opens (1ST CURTAIN) or
immediately before it closes (2ND CURTAIN). 1ST
CURTAIN is recommended in most circumstances.
Description Description