Using The Vpb-Xt2 - FujiFilm X-T2 Owner's Manual

Using the VPB-XT2

When fully-charged batteries are inserted in both the
camera and the VPB-XT2, the performance selector
can be used to improve shutter response and boost
the frame advance rate in continuous (burst) mode.
Position Position
Boosted
Normal
* Regardless of the option chosen with the performance selector,
the maximum frame rate with electronic shutter is 14 fps.
† Requires at least two batteries with some charge remaining, or if
an AC power adapter is connected, a battery with some charge
remaining inserted in the camera. Maximum frame rate if these
conditions are not met is 8.0 fps.
O
Movie recording, long time-exposures, or burst or inter-
val timer photography may end unexpectedly depend-
ing on the battery level or temperature.
The grip can be used with NP-W126 or NP-W126S bat-
teries. Turn the camera off before attaching or removing
the grip or inserting or removing batteries.
N
The performance selector takes priority over the op-
tion chosen for D POWER MANAGEMENT > PERFOR-
MANCE.
Maximum frame rate Maximum frame rate
†
11 fps
8.0 fps
Vertical Power Booster Grips
* *
Release lag Release lag
45 ms
50 ms
†
10
269