Setting Up - VTech T1200 User Manual

sETTING UP

Telephone base installation
1. Plug one end of the coiled handset cord into the
handset jack on the left side of the telephone base.
Plug the other end into the jack at the bottom of the
handset.
Plug the power adaptor into the POWER jack at the
2.
bottom of the base station. Plug the other end of the
power adaptor into a mains power wall socket.
3. Insert one end of the telephone line cord into the
TEL LINE jack at the bottom of the base station.
Plug the other end of the telephone line cord into
a telephone wall jack. If you have ADSL high speed
internet service, a ADSL ilter (not included) is
required.
Handset
10
Coiled handset cord