Lenovo System x3630 M4 Product Manual page 16

Hide thumbs Also See for System x3630 M4:

Table of Contents

Option 00Y7548 is used to upgrade standard (see Table 2) or custom (CTO or special bid) models with

twelve 3.5-inch hot-swap drive bays to fourteen 3.5-inch hot-swap drive bays. This option must be ordered

together with the option 00AL388, x3630 M4 Rear Fan Kit.

Option 00Y7548 contains the drive backplane, drive cage, signal and data cables, and two 1U riser cards:

PCIe Riser Card for slot 1 (1 x8 FH/HL + 1 x8 LP Slots) v2 and PCIe Riser Card 2 (1 x4 LP for Slotless

RAID) v2. These 1U riser cards replace the standard 2U riser cards used in the models with twelve

3.5-inch hot-swap drive bays, limiting the maximum number of I/O slots to three (for more information, see

the "I/O expansion options" section).

Option 00D9051 upgrades any four or eight bay model with an internal optical drive bay (for DVD-ROM or

Multiburner). This option includes one USB cable and one power cable. The optical drive is ordered

separately. This option is mutually exclusive with 90Y6370, Tape Drive Cage assembly.

Note: Option 00D9051, x3630 M4 ODD Cage assembly comes standard with every four or eight bay

standard model listed in Table 2.

Option 90Y6370 upgrades any four or eight bay model with an internal tape drive bay (for DDS5 or DDS6

tape drives). This option includes one USB cable and one power cable. The tape drive is ordered

separately. This option is mutually exclusive with 90Y6370, ODD Cage assembly.

System x3630 M4 (E5-2400 v2)

Table of Contents