Melissa 16180100 User Manual page 25

USE
• Lift the lid (2) off the blender jug (may
be a bit tight).
• Pour food into the blender jug. Solid
food such as fruit and vegetables
must be cut into squares no bigger
than 15×15 mm.
• NOTE! Never add liquid or food
above the maximum mark on the
blender jug.
• Place the lid on the blender jug and
screw it on securely.
• Plug in.
• Place a hand on the lid and switch on
the appliance by turning the On/Off
button to "1" (low speed) or "2" (high
speed).
• The appliance has a pulse function.
Turn the On/Off button to "P" and
hold it briefly in that position. When
you release the button, it reverts to
its original position and the appliance
stops.
• Always switch off the appliance
before removing the lid or measuring
cup and adding more food.
• Turn off the appliance by turning the
ON/OFF button to "0" when you have
finished blending. Wait until the blade
has come to a complete stop before
removing the lid.
UK
FAST CLEANING OF THE
BLENDER JUG
• You can clean the blender jug while
it is assembled by filling it halfway up
with hot water and a little washing-up
liquid.
• Switch the appliance on at high speed
to clean the blender jug, and then
rinse it under running water. Dry the
parts thoroughly.
• Take care not to touch the blades at
the base of the blender jug during
cleaning!
CLEANING
• Always clean the appliance immedi-
ately after use.
• Always switch the appliance off at the
wall socket and unplug before clean-
ing.
• Clean the motor section by wiping it
with a damp cloth. A little detergent
can be added if the appliance is
heavily soiled. Do not immerse the
motor unit of the appliance in water
and make sure no water gets into the
motor unit.
• All other parts can be washed by
hand or in a dishwasher. Dismantle all
parts and clean them separately. All
parts must be completely dry before
the appliance is assembled and used
again.
• Ensure the appliance is clean and dry
before storage.
• Never use abrasive detergents or
solvents.
25