Specifications; Adjustment Of The Feed Gap - Ribao JM-90 Instruction Manual

5. SPECIFICATIONS

Ambient Temperature
Ambient Humidity
Feeding System
Hopper Capacity
Stacker Capacity
Size of Countable Note
Thickness of Countable Note
Batch Number Displayed
Counting Number Displayed
Message Displayed
Power Source
Power Consumption
Dimensions
Weight
Counting Speed

6. ADJUSTMENT OF THE FEED GAP

The correct Feed Gap is vitally important to the smooth functioning of the machine. After a
long-term usage, the rubber components of both the Feed Roller and the Friction Roller may be
subject to natural wear. Under this condition, the Feed Gap may become too wide and, as a
result, Error Codes will be generated and note feeding will become erratic.
To check and adjust the Feed Gap to counteract this simple wear condition, follow the 3 steps
below, in conjunction with the photograph:
1. Manually insert a genuine banknote into the Feed Gap and move it back and forth. If you
don't feel any resistance, it indicates the gap is too wide; if the resistance is very strong, it
indicates the gap is too narrow.
2. If the Feed Gap is found to be too wide, adjust the Thickness Knob counter-clockwise to
reduce the Feed Gap until the proper slipping-resistance is achieved with your banknote.
3. If the Feed Gap is found to be too narrow, adjust the Thickness Knob clockwise to
increase the Feed Gap until the proper slipping-resistance is achieved with your banknote.
~
0 40℃
~
20 80%
Roller Friction System
400 notes
200 notes
~
50×90 110×185(mm)
~
0.05 0.2(mm)
Three Digits (LCD)
Seven Digits (LCD)
Three Digits (LCD)
~ ~
AC110 220V, 50 60Hz
≤55W
272mm×235mm×239mm
5.5Kg
Speed-1 900 notes/min.
Speed-11 1200 notes/min.
Speed-111 1600 notes/min.
12