Package Checklist - Weidmuller IE-SW-VL09T-6TX-3SC Hardware Installation Manual

Overview
The switch IE-SW-VL09T-6TX-3SC with 9 Copper-and 3 SC-Fiber-Ports
provides an economical solution for your Ethernet connections. As an added
bonus, the built-in smart alarm function helps system maintainers monitor the
health of your Ethernet network.
This Ethernet switch has a wide operating temperature range of -40 to 75°C,
and is designed to withstand a high degree of vibration and shock. The rugged
hardware design makes it perfect for ensuring that your Ethernet equipment
can withstand critical industrial applications, and complies with FCC and CE
Standards.

Package Checklist

The device is shipped with the following items. If any of these items is missing
or damaged, please contact your Weidmüller customer service for assistance.
1 Ethernet Switch
Hardware Installation Guide
Protective caps for unused ports
Features
High Performance Network Switching Technology
10/100BaseT(X) (RJ45), 100BaseFX (SC/ST-type, Multi/Single mode)
IEEE802.3/802.3u/802.3x
Store and Forward switching process type, with 1024 address entries
10/100M, Full/Half-Duplex, MDI/MDIX auto-sensing
Industrial Grade Reliablity
Power failure, port break alarm by relay output
Redundant dual DC power inputs
Rugged Design
Extended operating temperature from -40 to 75ºC
IP30, rugged high-strength case
DIN-rail or panel mounting ability
WARNING
The power for this product is intended to be supplied by a Listed
Power Supply, with output marked LPS, and rated to deliver 12 to
48 VDC at a maximum of 0.6A.
The DC jack should be used with an LPS unit that is rated to
deliver 12 to 48 VDC at a minimum of 1.1A. The product should
not be disassembled by operators or service people.
- 2 -