Install 790 Pcset Easy Software; 4.11.1 Systems Requirements; 4.11.2 Installing Software - Reiner jetStamp 790 Operating Manual

4.11

Install 790 PCset easy Software

Systems Requirements
Installing software

4.11.1 Systems Requirements

Supported REINER devices
- jetStamp 790
- jetStamp 792
Hardware
- PC with Pentium processor (also compatible) or higher
- Graphics adapter with a min. resolution of 800 × 600 pixels (at least 256 colours; optimal:
TrueColor,
24 Bit, 16.78 million colours)
- RAM, at least 32 MB
- 10 MB free hard disc memory
- 1 free USB interface
Supported operating systems
- Windows 7, Windows 7 64 Bit, Windows 8, Windows 8 64 Bit

4.11.2 Installing software

Installation is only possible with administrator rights on the computer.
Insert 790 PCset easy-CD into the drive.
If the installation programme does not start up automatically, start the file "setup.exe".
Observe the installation programme's instructions.
ERNST REINER GmbH & Co. KG
Preparation and Taking into Operation 23