Reiner jetStamp 790 MP Operating Manual
Hide thumbs
Also See for jetStamp 790 MP:
- Operating manual (73 pages) ,
- Operating manual (282 pages) ,
- Short instructions (88 pages)
Subscribe to Our Youtube Channel
Related Manuals for Reiner jetStamp 790 MP
Summary of Contents for Reiner jetStamp 790 MP
- Page 1 jetStamp 790/790 MP Bedienungsanleitung Operating Manual Manual de instrucciones Mode d‘emploi Manual de instruções Istruzioni per l‘uso...
- Page 3 jetStamp 790/790 MP...
-
Page 4: Operating Elements
jetStamp 790/790 MP Operating elements Trigger Ink cartridge handle Battery compartment Locking rail (back of the stamp) Keypad Reset button (back of the stamp) Display Charging station Cartridge Connection voltage supply Nozzles Green charging control light Small felt pad Mini-USB socket Protective film for cartridge Locking tab Cartridge contacts... -
Page 5: Display And Button Functions
jetStamp 790/790 MP Display and button functions The display is divided into the following three zones: The number of the currently selected imprint (P : 01 ... P : 29) Numberer repetition value (e.g R : 01/01) Selected imprint Top line: Pretext and number Bottom line: Date and time Display menu bar with menu items and commands Four buttons... -
Page 6: Table Of Contents
jetStamp 790/790 MP Contents jetStamp 790/790 MP Operating elements ...................48 Display and button functions ................49 Menu access .....................49 Important information ..................53 Batteries ......................53 For your safety Icon description ....................54 Battery safety advice ..................55 Safety Notes .....................56 Safe handling of cartridges .................56 1. - Page 7 jetStamp 790/790 MP 2.1.7. Stamping a constant number ............67 2.2. Favourites Set-up ..................68 2.3. Customer-specific imprints................69 3. Set-up Module – Detailed access 3.1. Menu Entry .....................70 3.2. Selecting imprint ..................70 3.3. Setting date and time ................71 3.4. DOUBLE PRINT ..................72 3.5.
- Page 8 jetStamp 790/790 MP 5. Maintenance 5.1. Replace Cartridge ..................84 5.2. Clean Cartridge Contacts ................84 5.3. Clean Nozzles ...................85 5.3.1. Automatic Nozzle Cleaning ...............85 5.3.2. Manual Nozzle Cleaning ..............85 5.4. Selecting Cleaning Interval .................85 5.5. Cleaning print carriage ................86 5.6. Clean Housing ..................86 6.
-
Page 9: Important Information
jetStamp 790/790 MP Important information Before using the jetStamp 790/790MP for the first time, the operating manual must be read through, paying careful attention to the safety advice. In this way, you can avoid uncertain- ties and their accompanying safety risks when working with the electronic stamp, for the sake of your own safety and to prevent damage to the device. -
Page 10: For Your Safety
jetStamp 790/790 MP For your safety Icon description DANGER Warnings about risks, where non-observance of the measures can cause immediate death or serious injuries. WARNING Warnings about risks, where non-observance of the measures can cause death or serious injuries. CAUTION Warnings about risks, where non-observance of the measures can cause injuries. -
Page 11: Battery Safety Advice
Only use rechargeable batteries type nickel metal hydride (NiMH, REINER item number: 791 213 - 100) of build AAA. Always replace all four flat rechargeable batteries at once. Non-approved batteries can cause damage or operational faults. -
Page 12: Safety Notes
jetStamp 790/790 MP Safety Notes WARNING Danger of fire from incorrect mains voltage. Check that the local mains voltage matches the voltage indicated on the mains adapter. CAUTION Danger of tripping and damage to the device from device lines placed freely in the room. Place the device lines so that they do not pose any danger source! NOTICE Damage to the device due to improper transport. -
Page 13: Preparation And Set-Up
jetStamp 790/790 MP 1. Preparation and Set-up 1.1. Set-up Only connect the device to the PC after the 790 PCset easy software has been installed (see “Installing 790 PCset easy-Software“, page 63). The batteries must be completely charged before using the stamp for the first time. This takes about 14 hours. -
Page 14: Setting Time And Date
jetStamp 790/790 MP 1.2. Setting time and date See “Setting time and date”, page 71. 1.3. Insert cartridge When using special ink (MP), observe the notes in the operating instructions. CAUTION Health risks if ink is swallowed. Don’t swallow! Keep cartridge out of the reach of children! Insert cartridge Fig. -
Page 15: Stored Imprints
jetStamp 790/790 MP 1.5. Stored imprints Number P : 01 to P : 25 are pre-set imprints (see “Overview of saved imprints”, page 60), which contain individual print fields such as “text prefix“ (see page 62), “numberer“ (see page 64), “time” and “date” (see page 71) and must be set before stamping. A “Pretext”... -
Page 16: Overview Of Stored Imprints
jetStamp 790/790 MP 1.7. Overview of stored imprints Imprints P : 01 to P : 04 = Pretext + Date P : 01 P : 02 P : 01 P : 02 EING. 29. FEB 2020 EING. 29 . 02 . 2020 CLOCK NO/TXT NEXT... - Page 17 jetStamp 790/790 MP Imprints P : 11 to P : 14 = Numberer + Pretext + Date P : 11 P : 12 P : 11 R : 01 / 01 P : 12 R : 01 / 01 00000000 00000000 EING.
-
Page 18: Selecting Pretext
jetStamp 790/790 MP 1.8. Selecting pretext The following pretexts can be set for the imprints P : 01 to P : 25. RECVD INV. DRAFT SENT ORDER PAID ORIG FILE ENT.D RECPT REG.D _ _ _ _ _ (= pretext switched off) Press [MODE] until [NO/TXT] appears in the display menu bar. -
Page 19: Installing 790 Pcset Easy-Software
790/790 MP 1.10. Installing 790 PCset easy-Software 1.10.1. System Requirements Supported REINER devices - jetStamp 790 - jetStamp 792 Hardware - PC with Pentium processor (also compatible) or higher - Graphics adapter with a min. resolution of 800 × 600 pixels (at least 256 colours;... -
Page 20: Using The Jetstamp 790/790Mp - Normal Operation
(see page 69) in which a numberer is contained must be selected (see “Selecting imprints”, page 70). A second numberer can be inserted by a specialist vendor or the REINER support in customer-specific imprints (see “Customer-specific imprints”, page 69). 2.1.1. Leading zero setting Leading zeros can be suppressed or printed, e.g 5 or 00000005. -
Page 21: Skip Value
jetStamp 790/790 MP If a second numberer is required, customer-specific imprints in the range from P : 26 to P : 29 must be selected (see “Selecting imprint”, page 70). Proceed as in Menu access (see page 49). Press [NEXT] until “MODE NUM 2” appears. Proceed using the same process. -
Page 22: Repetition
jetStamp 790/790 MP 2.1.4. Repetition Defines the number of times an imprint is repeated. If, for example, the value “03” is set, the numberer prints the same number three times before counting further. Press [MODE] until [NO/TXT] appears in the display menu bar. Press [NO/TXT]. -
Page 23: Limit Values (Numberer)
jetStamp 790/790 MP 2.1.6. Limit values (numberer) Definition of the limit values that the numberer counts from and to, e.g. starting at 10, stopping at 20 and starting again from 10. Setting limit values Press [MODE] until [COUNT] appears in the display menu bar. Press [COUNT] until the required minimum value is set. -
Page 24: Favourites Set-Up
jetStamp 790/790 MP 2.2. Favourites Set-up Using this function, you can reduce the 29 programmed imprints to the number that you actually require, e.g. only four visible imprints. In this way, you can switch more quickly between the individual imprints. In stamping mode, imprints can be selected individually with [NEXT]. -
Page 25: Customer-Specific Imprints
jetStamp 790/790 MP 2.3. Customer-specific imprints Customer-specific imprints, P : 26 to P : 29, can be created and transferred with the 790 PCset easy. – or – Individual texts with a maximum of two lines can be created. Each line can contain a maximum of 20 characters. -
Page 26: Set-Up Module - Detailed Access
jetStamp 790/790 MP 3. Set-up Module – Detailed access 3.1. Menu Entry The Setup-Module has two sub-sections. “SETUP - MODULE UPDATE“ can only be used in connection with the 790 PCset easy. “SETUP - MODULE SETTINGS“ further extensive settings that influence the imprint and handling can be carried out. -
Page 27: Setting Date And Time
jetStamp 790/790 MP 3.3. Setting date and time Stored imprint P : 01 to P : 04 or P : 11 to P : 25 or customer-specific imprints (see page 69) in which a time or date is contained must be selected (see “Selecting imprints”, page 70). Setting the time Press [MODE] until [CLOCK] appears in the display menu bar. -
Page 28: Double Print
jetStamp 790/790 MP 3.4. DOUBLE PRINT DOUBLE PRINT is only available when using MP cartridges. For an imprint with intense colour. Device stamps the imprints twice. Proceed as in menu access (see page 49). Press [MODE] until “DOUBLE PRINT” appears. Press [CALL]. -
Page 29: Selecting Language
jetStamp 790/790 MP 3.6. Selecting language Proceed as in menu access (see page 49). Press [NEXT] until “LANGUAGE” appears. To adjust the language setting, press [VARY]. To increase the number value, press [INC]. To decrease the number value, press [DEC]. 0 = German 5 = Portuguese 1 = French... -
Page 30: Summertime
jetStamp 790/790 MP 3.8. Summertime Proceed as in menu access (see page 49). Press [NEXT] until “SUMMERTIME” appears. Press [VARY]. To increase the number value, press [INC]. To decrease the number value, press [DEC]. 0 = No summertime change 1 = European summertime change from 1996 2 = European summertime change prior to 1996 3 = American summertime change To move directly to the next menu item,... -
Page 31: Password [Setup]
jetStamp 790/790 MP 3.10. Password [SETUP] Blocks access to the Setup-Module with a password and protects it against misuse. The factory-set password is 2468. Proceed as in menu access (see page 49). Press [NEXT] until “PASSW SETUP” appears. Press [VARY]. To activate the password input, press [ON]. -
Page 32: Password [No/Txt]
jetStamp 790/790 MP To deactivate password input, press [OFF]. To move directly to the next menu item, press [RETURN] once. – or – To save changes and to return to the main menu, press [RETURN] three times. The main menu appears. 3.12. -
Page 33: Password [Print]
jetStamp 790/790 MP 3.13. Password [PRINT] Blocks access to stamping with a password and protects it against misuse. The factory-set password is 2468. Proceed as in menu access (see page 49). Press [NEXT] until “PASSW PRINT” appears. Press [VARY]. To activate the password input, press [ON]. Password input is active. -
Page 34: Software Application 790 Pcset Easy
jetStamp 790/790 MP 4. Software Application 790 PCset easy Customer-specific imprints P : 26 to P : 29, can be generated and transferred with the 790 PCset easy. The online help of the 790 PCset easy software contains further information. To open the online help, select the menu entry Help in the menu “Help”... -
Page 35: Operating Interface
jetStamp 790/790 MP 4.4. Operating Interface The operating interface is structured in four areas: Menu bar Symbol bar 2 lines for design of the imprints Preview Menu bar Transfer Symbol bar Exit Imprints Arrows Preview Transfer of external imprints... -
Page 36: Menu Commands
jetStamp 790/790 MP 4.4.1. Menu Commands Symbol Command Description Transfer of external Transfer external imprints in the format .pcr imprints from a data carrier to the jetStamp 790. Select imprints Use the arrows switch between display of the P : 26 to P : 29 imprints P : 26 to P : 29 for configuration. -
Page 37: Menu Bar
jetStamp 790/790 MP 4.4.3. Menu Bar In addition to the functions in the symbol bar , you will find a menu bar of the 790 PCset easy application. In the menu bar, you can find both the generally common, self-explanatory standard commands and 790 PCset easy-specific menu commands. -
Page 38: Example Workflow: Generate Imprint
jetStamp 790/790 MP 4.5. Example Workflow: Generate imprint Importing own imprints always overwrite all 4 imprints saved in the device (P : 26 to P : 29). 4.5.1. Starting PCset easy Double-click the 790 PCset easy symbol The 790 PCset easy software is started. 4.5.2. -
Page 39: Transfer Imprints To The Jetstamp 790
jetStamp 790/790 MP 4.5.4. Transfer imprints to the jetStamp 790 Click the transfer symbol The transfer window appears After successful transfer, the following message appears in the display of the jetStamp 790 after a few seconds. SM-UPDATE STAMP PICTURE RETURN The imprints P : 26 to P : 29 were saved in the jetStamp 790 and may be printed. -
Page 40: Maintenance
jetStamp 790/790 MP 5. Maintenance 5.1. Replace Cartridge When using special ink (MP), observe the notes in the operating instructions. CAUTION Health risks if ink is swallowed. Don’t swallow! Keep cartridge out of the reach of children! Replace Cartridge Fig. ... -
Page 41: Clean Nozzles
jetStamp 790/790 MP 5.3. Clean Nozzles If there is stripe formation or if any problems occur with the print quality, there may be dried ink in the nozzles To warrant high print quality, the nozzles should be cleaned at regular intervals. For notes on temperatures and humidity, see “Technical Data”... -
Page 42: Cleaning Print Carriage
CAUTION Danger of electric shock when liquids enter the inside of the device. Pull the mains adapter from the socket. Inform specialist dealer or REINER service. NOTICE Aggressive cleaning agents may damage the housing surface. Do not use abrasives and plastic-dissolving detergents for cleaning. -
Page 43: Troubleshooting
jetStamp 790/790 MP 6. Troubleshooting 6.1. Operating and fault messages Display Fault cause Fault correction Dark display/ Display fault Press the Reset button Lines in the display CHARGE BATTERY Batteries are discharged Charged batteries NO IMPRINT POSSIBLE EMPTY BATTERY Battery is empty Charge batteries NO IMPRINT POSSIBLE IMPRINT BLOCKED... -
Page 44: Rating Plate
jetStamp 790/790 MP 7. Technical data 7.1. Rating plate Please take note of the information shown on the rating plate before connecting the device. The rating plate is located on the bottom of the jetStamp 790. Explanation: • Mod. = Model designation of your electronic stamp •... -
Page 45: Technical Data
jetStamp 790/790 MP 7.2. Technical data Technical data Stamping time approx. 0.7 seconds Stamping cycle > 2 seconds Print capacity per cartridge approx. 300,000 characters Standby time per battery charge 6 days Operating time per battery charge approx. 500 prints Battery charging time approx. -
Page 46: Transport And Disposal
jetStamp 790/790 MP 7.3. Transport and disposal Transport You should retain the jetStamp 790 packaging as it can be used to protect the product if it needs to be transported. Disposal Directive 2006/66/EC: Consumers are obliged to return flat batteries and recharge- able batteries to a suitable collection site. -
Page 47: Contact
E-Mail: reiner@reiner.de www.reiner.de © 2014 Ernst Reiner GmbH & Co. KG All rights reserved. Translation, reprint and other reproduction of these operating instructions, even in parts and no matter the form, shall require our express written consent. We reserve the right to make content changes to these operating instructions without notice. -
Page 48: Index
jetStamp 790/790 MP 10. Index Password [NO/TXT] ......76 Password [PRINT] ......77 Accessories .........90 Password Set-up ......77 Password [SETUP] ......75 Block/unblock print triggering ....74 Pretext ..........62 Printing ..........62 Clean Housing ........86 Cleaning interval ........72 Rating plate ........88 Cleaning print carriage ......86 Replace Cartridge .........84 Clean Nozzles ........85 Reset button ........87... - Page 49 jetStamp 790/790 MP Notes...
- Page 50 Award for Operational Excellence...
Need help?
Do you have a question about the jetStamp 790 MP and is the answer not in the manual?
Questions and answers