Drone Trimming; Pre-Flight Checklist - Kaiser Baas THETA User Manual

DRONE TRIMMING

Control of the Drone can be trimmed using the trim buttons on the Transmitter. If the
Drone is drifting off during a hover or other flight maneuver, these buttons are used to
counter this drift.
To reset all trimming simply land the Drone and re-calibrate.

PRE-FLIGHT CHECKLIST

• Do a COMPLETE check of your surroundings; look for hazards above, in front and
behind you.
• Be especially aware of things like power lines and nearby people and animals. If these
hazards exist, DO NOT deploy your Drone and consider a new take-off Location.
• DO NOT FLY in inclement weather or moderate to high winds.
• DO NOT FLY in populated areas as unforeseen flight hazards may occur.
• Remember YOU are the Pilot. Safety is YOUR responsibility.
• DO NOT FLY near airports/controlled airspace. Ensure that you are at least 5.5kms
from any airfield and you are adhering to any regulations and laws laid out by your
local aviation authority. Remember: checking your distance to these areas is YOUR
responsibility
• Never fly your Drone near large crowds or above unwilling spectators.
• Make sure that you have the full permission of people within flying range of your
Drone and DO NOT fly your Drone where people have not given permission or have
requested that you not fly.
• Ensure the Drone is orientated in the desired direction.
16
THETA DRONE | User Guide